SELH02002 LDC ‘Landscaper’ Infiltration Unit

SELH02002 LDC ‘Landscaper’ Infiltration Unit

Download Data Sheet in PDF

 

Design

The Skeletank Landscaper unit is a pre-formed, high performance soakaway module for use within soft landscaping areas, such as lawns and borders. The modules can be interlinked to form highly efficient drainage fields.

SELH 02002 LDC Infiltration Unit

Specification

The shallow nature of a Skeletank Landscaper system is particularly useful where there are ground problems, such as high groundwater levels, contamination or shallow rock layers.

Each Skeletank Landscaper module is encapsulated by a 2mm mesh, which provides an excellent open surface area, allowing collected surface water runoff to easily flow into surrounding sub-soils.

Each module also has a pre-formed 110mm diameter socket at each end, allowing efficient connection to standard PVC-u underground pipework and units to be easily interlinked.

 

LDC Infiltration System diagram

 

Element Dimensions
Length* 2000mm
Width* 500mm
Height* 400mm
Properties Specification
Weight 18kg
Effective perforated surface area 59%
Volumetric void 95%
Approximate Storage Volume 370 litres
Short term compressive strength 400kN/m2
Material HDPE mesh with PP core

* Nominal sizes only 

 

SELH 02002 LDC detail drawing 21 July 2014

Top

 

Disclaimer

This product specification is neither giving nor implying warranty for the use of this information for design and installation, as these are beyond our control. The data provided is typical and based upon the mean values obtained from the samples taken for any one test. If not otherwise indicated the test procedures reflect usually the mean of five samples. HydroWMS Limited reserve the right to change the specifications without prior notice. Skeletank® is a registered trade mark.