SELH03003 Catchpit 110

SELH03003 Catchpit 110

Download Data Sheet in PDF

Design

Skeletank catchpit chambers are designed to complement Skeletank attenuation and infiltration systems.

SELH 03003 315mm Ø Catchpit Chamber 110

SELH 03003 315mm Ø Catchpit Chamber 110

Specification

The SELH03003 has a diameter of 315mm and an overall nominal height of 850mm. The polyethylene chamber can be easily reduced on site to suit required invert levels.

Each chamber has 4 number 110mm diameter pipe spigots to suit standard PVC-u push fit drainage pipework. Each spigot can be used to form either an inlet or outlet.

The SELH03003 chamber has a 50mm deep sump to accommodate the deposition of silt and debris in the collected rainwater for later removal under a regular maintenance regime.

 

LDC Infiltration System diagram

 

Element Dimensions
Chamber diameter 315mm
Sump depth 50mm
Overall depth 847mm
spigot diameter 110mm
No. of spigots 4
Material Polyethylene

 

SELH 03003 315mm Ø Catchpit Chamber 110 Detail Drawing

SELH 03003 315mm Ø Catchpit Chamber 110 Detail Drawing

 

Disclaimer

This product specification is neither giving nor implying warranty for the use of this information for design and installation, as these are beyond our control. The data provided is typical and based upon the mean values obtained from the samples taken for any one test. If not otherwise indicated the test procedures reflect usually the mean of five samples. HydroWMS Limited reserve the right to change the specifications without prior notice. Skeletank® is a registered trade mark.