SELH03004 Catchpit 110/160
Design
Skeletank catchpit chambers are designed to complement Skeletank attenuation and infiltration systems.

SELH 03004 315mm Ø Catchpit Chamber 110/160
Specification
The SELH03004 has a diameter of 315mm and an overall nominal height of 850mm. The polyethylene chamber can be easily reduced on site to suit required invert levels.
Each chamber has 3 number 110mm diameter inlet pipe spigots and 1 number 160mm diameter outlet pipe spigot to suit standard PVC-u push fit drainage pipework.
The SELH03003 chamber has a 50mm deep sump to accommodate the deposition of silt and debris in the collected rainwater for later removal under a regular maintenance regime.
Element |
Dimensions |
Chamber diameter |
315mm |
Sump depth |
50mm |
Overall depth |
847mm |
spigot diameter |
3 x 110mm, 1 x 160mm |
No. of spigots |
4 |
Material |
Polyethylene |

SELH 03004 315mm Ø Catchpit Chamber 110/160 Detail Drawing
Disclaimer
This product specification is neither giving nor implying warranty for the use of this information for design and installation, as these are beyond our control. The data provided is typical and based upon the mean values obtained from the samples taken for any one test. If not otherwise indicated the test procedures reflect usually the mean of five samples. HydroWMS Limited reserve the right to change the specifications without prior notice. Skeletank® is a registered trade mark.