SELH04001 Catchpit 160
Design
Skeletank catchpit chambers are designed to complement Skeletank attenuation and infiltration systems.
The SELH04001 has a diameter of 500mm and an overall nominal height of 750mm. The polyethylene chamber can be easily reduced on site to suit required invert levels.

SELH 04001 Skeletank Catchpit Chamber 500mm
Specification
Each chamber has 5 number 160mm diameter inlet pipe spigots and 1 number 160mm diameter outlet pipe spigot to suit standard PVC-u push fit drainage pipework. The inlet/outlets can be reduced to 110mm diameter by incorporating level invert reducers as required.
The SELH04001 chamber has a 50mm deep sump to accommodate the deposition of silt and debris in the collected rainwater for later removal under a regular maintenance regime.
Element |
Dimensions |
Chamber diameter |
500mm |
Sump depth |
50mm |
Overall depth |
750mm |
spigot diameter |
5 x 160mm, 1 x 160mm |
No. of spigots |
6 |
Material |
Polyethylene |

SELH 04001 Hydro WMS Skeletank Catchpit Chamber 500mm Detail Drawing
Disclaimer
This product specification is neither giving nor implying warranty for the use of this information for design and installation, as these are beyond our control. The data provided is typical and based upon the mean values obtained from the samples taken for any one test. If not otherwise indicated the test procedures reflect usually the mean of five samples. HydroWMS Limited reserve the right to change the specifications without prior notice. Skeletank® is a registered trade mark.